The Industrial Training Division at AJ Tech Research Labs is involved in providing Quality, Industry & Placement/Job oriented skill building/enhancement solutions to educational institutes and students.

AJ Tech Research Labs Training Division targets to bridge the existing gap between industry and academia. As per current study, only around 15% of the engineering graduate passing annually out of engineering colleges is industry ready (who can be deployed in Industry readily).

AJ Tech Research Labs being in the niche area of Embedded Systems and IT sector, we observed that finding a skilled fresher who is industry ready has always been a greater challenge. This prompted us to come out with our innovative offerings to address this Industry-Academia gap.

We have taken a step forward to organise various Industry Oriented Programmes for the students on various technical topics.

Certification Programme & Workshop:

  • PCB Design & Circuit Simulation

    A Printed Circuit Board (PCB) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive substrate. PCBs can be single sided (one copper layer), double sided (two copper layers) or multi-layer. Conductors on different layers are connected with plated-through holes called vias. Advanced PCBs may contain components – capacitors, resistors or active devices – embedded in the substrate.

    Printed circuit boards are used in almost all of the electronic products.

    OBJECTIVE OF THE WORKSHOP: The Main objective of this workshop is to make the students conceptually and practically aware about:

    • Understanding of the steps and processes involved in PCB design Process
    • PCB Fabrication Process
    • Schematic Capture using Industry Standard Schematic Capture tools
    • Preparation of Board for Layout
    • Simulation with LT Spice
    • Gerber file Creation and View
    • Practical hands on to demonstrate PCB fabrication of a circuit.

    DURATION OF THE WORKSHOP: 30hours

    TOPICS and HANDS-ON ACTIVITY IN THE WORKSHOP:
    • Introduction to PCB Design Process and Software Tools used
    • Developing the PCB Design Schematic, auto and manual Routing of the Circuit
    • Steps in PCB Design Process (including Gerber file creation) explained in detail
    • Drilling and Placement of Components, with Final Soldering
    • Final Concluding Remarks

  • Arduino with Ethernet based industrial application in Internet of Things(IoT)

    AJ Tech Research Labs has a strong emphasis in the area of Internet of Things(IoT)

    The Internet of Things (IoT) is about devices and services delivering end-to-end solutions. Although the IoT market is made up of many vertical segments, most applications that can make use of Internet connected devices have a common foundation.For example - smart cities, basic wearables and smart home devices require basic OS functionality like drivers, device security and provisioning support. In addition, network connectivity varies from application to application, in general however, the IP networking, security, application layer and device management needs are all common.

    OBJECTIVE OF THE WORKSHOP: The Main objective of this workshop is to make the students conceptually and practically aware about:

    • How Internet of Things(IoT) is changing everything around us
    • Using GPRS Technology to push data on a Central Server.
    • Interfacing controller to a Modbus based device

    DURATION OF THE WORKSHOP: 16-hours

    TOPICS and HANDS-ON ACTIVITY IN THE WORKSHOP:
    • Hands-on Sessions by experts in Internet-of-Things
    • Hands-on in GPRS modem and using Modbus Technologies
    • Fabricating and Programming the Hardware
    • Testing of Hardware and Competition

  • Embedded System Design

    Program Objective: This course starts with a review of C Programming Skills and Embedded Approach, Reading Datasheets, Introduction to Compilers and IDE, Controller Architecture, Understanding Peripherals and Protocols. It is a 100% Practical program which gives a great start to the students to understand Electronics, Basic Programming and how to work with the Microcontrollers from the Practical Approach. This program enriches the knowledge of the student and also motivates them very strongly into a Career in Electronics field.

    Program Benefits: At the end of the Program the student can apply C Programming for Embedded, understand the controller from the data sheet point of view, usage of Compiler and IDE for Particular Controller (MPLAB, Keil and Proteus), Programming LED, LCD, Seven Segment, Motor Control, PWM, Real Time Clock, RS-232, I2C and SPI. This program also includes Introduction to ARM Architecture.

    DURATION OF THE WORKSHOP: 150-hours

    Program Salient Features:
    • In depth coverage on Industry Required Skills
    • Focus on building core skills in Embedded Systems and industrial automation
    • Top Performers can be hired by AJ Tech Research Labs

  • IMAGE PROCESSING using MATLAB

    This workshop presents a Computer Base Image Processing using MATLAB workshop which would deal with different tool and algorithm based matlab coding where we learn Image processing, video processing, GUI development, Gesture control application with many demonstration projects on matlab.

    OBJECTIVE OF THE WORKSHOP: The Main objective of this workshop is to make the students conceptually and practically aware about:

    • Understanding of the steps and processes involved in Image Processing
    • In depth exposure on working on MATLAB
    • Learn Image processing, Video processing, GUI development, Gesture control application with many demonstration projects on MATLAB

    DURATION OF THE WORKSHOP: 50-hours

    TOPICS and HANDS-ON ACTIVITY IN THE WORKSHOP:
    • Introduction to MATLAB
    • Introduction to Image Processing Toolbox
    • Video Processing and Video Acquisition
    • GUI Development using hands on approach